Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black
200-0101
$3.82*
Base price:
$3.82* / m
(includes $1.50* handling fee)
Base price:
$3.82* / m
Downloads
The hymns of praise by cable...
Specialists make this cable a top seller. This microphone cable was originally developed for the makers of studio microphones. Their high quality standards helped us produce a professional and yet affordable studio microphone cable. SC-Source MKII is 100 % shielded by a tight Cu braid and a robust fleece woven around the wire pairs. The fleece is vaporized on both sides with a conductive aluminum coating. This ensures that even with heavy-duty use the 100 % shielding remains unchanged. This cable should be used where electric sources can affect the audio and data transfer. Cables with comparable electrical values cost almost twice as much with other manufacturers! Due to the fine 0.05 mm Cu wires it is a very popular cable for outdoor transmissions and mobile applications.
Advantages:
- Neutral and loss-free audio transmission due to special copper strand design
- 100 % shielding due to dense helical copper mesh screen plus extra AL fleece/AL foil
- Professional technology at a budget price
- Available in a notch- and cold-resistant PUR version
Application:
- Professional studio and microphone technology
- Outdoor transmission/OB van
- Permanent stage application
| Article number: | 200-0101 |
|---|---|
| Name: | SC-Source MKII |
| EAN: | 4049371004169 |
| Properties: | Analog, OFC oxygen free copper |
| Application area: | ELA 100 V, Installation, Mobile outdoor / indoor, Stage / live, Studio / Broadcast |
| Application: | Microphone Cable |
| Colour: | black |
| Signal transmission: | symmetrical |
| Construction: | (2LI2Y0,25mm²)(ST)DY |
| Jacket material: | PVC |
| Jacket Ø [mm]: | 6.50 |
| Jacket Ø ["]: | 0.2559 |
| Number of Channels (audio): | 1 |
| Inner conductor (audio): | 2 |
| Inner conductor (audio) [mm²]: | 0,25 |
| Inner conductor (audio) [sqin]: | 0.0004 |
| Inner conductor Ø (audio) [mm]: | 0,56 |
| Inner conductor Ø (audio) ["]: | 0.022 |
| AWG (audio): | 23 |
| Shielding: | copper spiral sleeve tin-plated 95 % + AL-fleece |
| Shielding factor [%]: | 100 |
| Copper strands (audio): | 128 |
| Copper strand Ø (audio) [mm]: | 0,05 |
| Copper strand Ø (audio) ["]: | 0.002 |
| Conductor insulation material: | PE |
| Conductor insulation Ø [mm]: | 1,55 |
| Conductor insulation Ø ["]: | 0.061 |
| Weight per 1 m [g]: | 48 |
| Weight at 1000 ft. [lbs]: | 32.3 |
| UV-resistant: | yes |
| Fire load per m [kWh]: | 0,21 |
| Style variant: | round |
| Packing: | 100 m spool, 500 m spool |
| Temperature min. [°C]: | -25 |
| Temperature max. [°C]: | 70 |
| Width [mm]: | 6,5 |
| Width ["]: | 0.2559 |
| Height [mm]: | 6,5 |
| Height ["]: | 0.2559 |
| Capac. cond./cond. per 1 m (audio) [pF]: | 60 |
| Capacity wire/wire at 1 ft. (audio) [pF]: | 18.288 |
| Capac. cond./shield. per 1 m (audio) [pF]: | 110 |
| Capacity wire/electic screen at 1 ft. (audio) [pF]: | 33.528 |
| Insulation resist. per 1 km [GΩ]: | 0,2 |
| Insulation resist. per 1000 feet [GΩ]: | 0.061 |
| Insulation resist. per 1 km (audio) [GΩ]: | 0,2 |
| Insulation resist. per 1000 feet (audio) [GΩ]: | 0.061 |
| Conductor resistance per 1 km [Ω]: | 78 |
| Conductor resistance per 1000 ft. [Ω]: | 23.7744 |
| Shield. resistance per 1 km [Ω]: | 25 |
| Shield. resistance per 1000 ft. [Ω]: | 7.62 |
| BPVo-Euroclass: | Fca |
| Article number: | 200-0101 |
|---|---|
| Name: | SC-Source MKII |
| EAN: | 4049371004169 |
| Properties: | Analog, OFC oxygen free copper |
| Application area: | ELA 100 V, Installation, Mobile outdoor / indoor, Stage / live, Studio / Broadcast |
| Application: | Microphone Cable |
| Colour: | black |
| Signal transmission: | symmetrical |
| Construction: | (2LI2Y0,25mm²)(ST)DY |
| Jacket material: | PVC |
| Jacket Ø [mm]: | 6.50 |
| Jacket Ø ["]: | 0.2559 |
| Number of Channels (audio): | 1 |
| Inner conductor (audio): | 2 |
| Inner conductor (audio) [mm²]: | 0,25 |
| Inner conductor (audio) [sqin]: | 0.0004 |
| Inner conductor Ø (audio) [mm]: | 0,56 |
| Inner conductor Ø (audio) ["]: | 0.022 |
| AWG (audio): | 23 |
| Shielding: | copper spiral sleeve tin-plated 95 % + AL-fleece |
| Shielding factor [%]: | 100 |
| Copper strands (audio): | 128 |
| Copper strand Ø (audio) [mm]: | 0,05 |
| Copper strand Ø (audio) ["]: | 0.002 |
| Conductor insulation material: | PE |
| Conductor insulation Ø [mm]: | 1,55 |
| Conductor insulation Ø ["]: | 0.061 |
| Weight per 1 m [g]: | 48 |
| Weight at 1000 ft. [lbs]: | 32.3 |
| UV-resistant: | yes |
| Fire load per m [kWh]: | 0,21 |
| Style variant: | round |
| Packing: | 100 m spool, 500 m spool |
| Temperature min. [°C]: | -25 |
| Temperature max. [°C]: | 70 |
| Width [mm]: | 6,5 |
| Width ["]: | 0.2559 |
| Height [mm]: | 6,5 |
| Height ["]: | 0.2559 |
| Capac. cond./cond. per 1 m (audio) [pF]: | 60 |
| Capacity wire/wire at 1 ft. (audio) [pF]: | 18.288 |
| Capac. cond./shield. per 1 m (audio) [pF]: | 110 |
| Capacity wire/electic screen at 1 ft. (audio) [pF]: | 33.528 |
| Insulation resist. per 1 km [GΩ]: | 0,2 |
| Insulation resist. per 1000 feet [GΩ]: | 0.061 |
| Insulation resist. per 1 km (audio) [GΩ]: | 0,2 |
| Insulation resist. per 1000 feet (audio) [GΩ]: | 0.061 |
| Conductor resistance per 1 km [Ω]: | 78 |
| Conductor resistance per 1000 ft. [Ω]: | 23.7744 |
| Shield. resistance per 1 km [Ω]: | 25 |
| Shield. resistance per 1000 ft. [Ω]: | 7.62 |
| BPVo-Euroclass: | Fca |
SC-Source MKII
Microphone Cable
Advantages:
- Neutral and loss-free audio transmission due to special copper strand design
- 100 % shielding due to dense helical copper mesh screen plus extra AL fleece/AL foil
- Professional technology at a budget price
- Available in a notch- and cold-resistant PUR version
Application:
- Professional studio and microphone technology
- Outdoor transmission/OB van
- Permanent stage application
Technical Data:
- Article number: 200-0101
- Name: SC-Source MKII
- EAN: 4049371004169
- Properties: OFC oxygen free copper
- Properties: Analog
- Application area: Stage / live
- Application area: Mobile outdoor / indoor
- Application area: Installation
- Application area: ELA 100 V
- Application area: Studio / Broadcast
- Application: Microphone Cable
- Colour: black
- Signal transmission: symmetrical
- Construction: (2LI2Y0,25mm²)(ST)DY
- Jacket material: PVC
- Jacket Ø: 6,50 mm
- Jacket Ø: 0.2559 "
- Number of Channels (audio): 1
- Inner conductor (audio): 2
- Inner conductor (audio): 0,25 mm²
- Inner conductor (audio): 0.0004 sqin
- Inner conductor Ø (audio): 0,56 mm
- Inner conductor Ø (audio): 0.022 "
- AWG (audio): 23
- Shielding: copper spiral sleeve tin-plated 95 % + AL-fleece
- Shielding factor: 100 %
- Copper strands (audio): 128
- Copper strand Ø (audio): 0,05 mm
- Copper strand Ø (audio): 0.002 "
- Conductor insulation material: PE
- Conductor insulation Ø: 1,55 mm
- Conductor insulation Ø: 0.061 "
- Weight per 1 m: 48 g
- Weight at 1000 ft.: 32.3 lbs
- UV-resistant: yes
- Fire load per m: 0,21 kWh
- Style variant: round
- Packing: 500 m spool
- Packing: 100 m spool
- Temperature min.: -25 °C
- Temperature max.: 70 °C
- Width: 6,5 mm
- Width: 0.2559 "
- Height: 6,5 mm
- Height: 0.2559 "
- Capac. cond./cond. per 1 m (audio): 60 pF
- Capacity wire/wire at 1 ft. (audio): 18.288 pF
- Capac. cond./shield. per 1 m (audio): 110 pF
- Capacity wire/electic screen at 1 ft. (audio): 33.528 pF
- Insulation resist. per 1 km: 0,2 GΩ
- Insulation resist. per 1000 feet: 0.061 GΩ
- Insulation resist. per 1 km (audio): 0,2 GΩ
- Insulation resist. per 1000 feet (audio): 0.061 GΩ
- Conductor resistance per 1 km: 78 Ω
- Conductor resistance per 1000 ft.: 23.7744 Ω
- Shield. resistance per 1 km: 25 Ω
- Shield. resistance per 1000 ft.: 7.62 Ω
- BPVo-Euroclass: Fca
Accessories 200-0101
HICON XLR PRO+, 3-pole female, gold-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief
$8.28*
HI-X3CF-G
Miscellaneous:With transparent code ring for your individuals labels!incl. two 6 chuck collet strain reliefs: for cable diameters from 2.5 to 6.5 mm + from 4.0 to 8.0 mm
HICON XLR PRO+, 3-pole male, gold-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief
$7.76*
HI-X3CM-G
Miscellaneous:With transparent code ring for your individuals labels!incl. two 6 chuck collet strain reliefs: for cable diameters from 2.5 to 6.5 mm + from 4.0 to 8.0 mm
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black
$8.17*
HI-X3CM-HD-B
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black
$9.17*
HI-X3CF-HD-B
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
Related products 200-0101
Microphone Cable Stage 22 Highflex, 2 x 0.22 mm² | XLR / jack, NEUTRIK®
$0.00*
SG05
Configuration: (SG05-0250-SW)2.50 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel coloured (NC3FX)1 x NEUTRIK® jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated pin, straight, nickel coloured (NP3C)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $54.63*
Microphone Cable SC-Source MKII Highflex, 2 x 0,25 mm² | XLR / XLR, HICON
$0.00*
SCBQU
The SC-Source MKII Highflex is the perfect cable for demanding radio engineers.It has a wire cross-section of 2 x 0,25 mm² and superfine 0.05 mm OFC copper strands! It is very easy to reel and guarantees high bending cycles. The SC-Source MKII Highflex has a dual shielding (aluminised fleece + braided Cu mesh screen) with 100 % optical coverage and remains totally noiseand pop-free even with problematic requirements. Due to the use of a chalk-free soft PVC it is very cold-resistant. We supply this cable with gold-plated HICON and NEUTRIK® connectors and a transparent 2“ (5 cm) shrink-on tube (unshrinked) for your individual labels.The SC-Source MKII Highflex is available in black. The screen is protected by an insulating sleeve. For identification purposes we use removable colour code rings.Example SCBQU2000-SW contents:20,00 m Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black (200-0101)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black (HI-X3CF-HD-B)0,05 x BTM095/TR1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black (HI-X3CM-HD-B)0,05 x BTM095/TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $41.40*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / XLR, NEUTRIK®
$0.00*
SG01
The Stage 22 Highflex is a high-quality and very inexpensive cable wioth a wire cross-section of 2 x 0,22 mm² (AWG 24) and a 6.4 mm (0.25 in.) thick super soft PVC jacket. It is PVC injected almost down to the core and perfectly easy to drum and wind. Comes with NEUTRIK® NC3MX or NC3FX XLR connectors.Example SG01-0600-SW contents:6,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FX)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MX)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $36.22*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, NEUTRIK®
$0.00*
SG04
Example SG04-0250-SW contents:2,50 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel coloured (NC3MX)1 x NEUTRIK® jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated pin, straight, nickel coloured (NP3C)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $53.93*
Microphone Cable SC-Source MKII Highflex, 2 x 0,25 mm² | XLR / XLR, NEUTRIK®
$0.00*
SCN9
SC-Source MKII Highflex is the perfect cable for the demanding stage musician. A transparent ring is provided for personal labelling. The cable has a wire gauge of 2 x 0,25 mm² and superfine 0.05 mm OFC copper strands. Its very easy to reel and guarantees high bending cycles. The SC-SOURCEMKII HIGHFLEX has a dual shielding (aluminised fleece + braided Cu screen) with 100 % optical coverage and is totally free from crackling and other noises, even under difficult live conditions. We supply this cable with the gold-plated NC3MXX-B and NC3FXX-B connectors by NEUTRIK®.Example SCN9-1000-SW contents:10,00 m Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black (200-0101)1 x NC3FXX-B-WOB1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x NC3MXX-B-WOB1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)Sommer cable cable straps1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $60.38*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / XLR, NEUTRIK®
$0.00*
SG0Q
Our Stage 22 Highflex is a high-quality and budget-friendly microphone cable with a wire gauge of 2 x 0,22 mm² (AWG 24) in a 6.4 mm thick Super Soft PVC jacket and dense CU helical copper mesh with 99% optical coverage as well as a capacitance of 68pF/m (cond./cond.). It is filled with PVC almost all the way to the core and allows for excellent reeling.We will gladly produce your custom lengths on request!Example SG0Q-1000-SW contents:10,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, black (NC3FXX-BAG)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, black (NC3MXX-BAG)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $38.52*
Microphone Cable Stage 22 Highflex, 2 x 0.22 mm² | XLR / jack, NEUTRIK®
$0.00*
SG02
Configuration: (SG02-0500-SW)5.00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel coloured (NC3MX)1 x NP2C-D1 x Cardboard packaging for blister hooks, Design Sommer cable
Microphone Cable SC-Source MKII Highflex, 2 x 0,25 mm² | XLR / XLR, NEUTRIK®
$0.00*
SCMFU
The highly flexible SC-Source MKII Highflex glows with superfine single wires in broadcasting quality. It has a dual shielding (aluminised fleece plus braided copper mesh screen) with 100 % optical coverage and remain totally noise- and pop-free even under difficult stage conditions. We fit them with NEUTRIK® NC3MXX and NC3FXX connectors and 5 cm of transparent shrink-on tube on each side for your personal labelling.Example SCMFU2000-SW contents:20,00 m Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black (200-0101)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)0,05 x BTM095/TR1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)0,05 x BTM095/TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $54.63*
Microphone Cable SC-Source MKII Highflex, 2 x 0,25 mm² | XLR / XLR, NEUTRIK®
$0.00*
SC35U
The SC-Source MKII Highflex is the perfect cable for demanding radio engineers.It has a wire cross-section of 2 x 0,25 mm² and superfine 0.05 mm OFC copper strands! It is very easy to reel and guarantees high bending cycles. The SC-Source MKII Highflex has a dual shielding (aluminised fleece + braided Cu mesh screen) with 100 % optical coverage and remains totally noiseand pop-free even with problematic requirements. Due to the use of a chalk-free soft PVC it is very cold-resistant. We supply this cable with gold-plated HICON and NEUTRIK® connectors and a transparent 2“ (5 cm) shrink-on tube (unshrinked) for your individual labels.The SC-Source MKII Highflex is available in black. The screen is protected by an insulating sleeve. For identification purposes we use removable colour code rings.Example SC35U1000-SW-SW contents:10,00 m Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black (200-0101)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, gold plated contact(s), straight, black (NC3FX-B)1 x NEUTRIK® Code ring for XLR MX, XLR FX black (XCR0)0,05 x BTM095/TR1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (NC3MX-B)1 x NEUTRIK® Code ring for XLR MX, XLR FX black (XCR0)0,05 x BTM095/TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $44.85*
Microphone Cable SC-Source MKII Highflex, 2 x 0,25 mm² | XLR / XLR, HICON
$0.00*
SCCFF
The SC-Source MKII Highflex is the perfect cable for demanding radio engineers.It has a wire cross-section of 2 x 0,25 mm² and superfine 0.05 mm OFC copper strands! It is very easy to reel and guarantees high bending cycles. The SC-Source MKII Highflex has a dual shielding (aluminised fleece + braided Cu mesh screen) with 100 % optical coverage and remains totally noiseand pop-free even with problematic requirements. Due to the use of a chalk-free soft PVC it is very cold-resistant. We supply this cable with gold-plated HICON and NEUTRIK® connectors and a transparent 2“ (5 cm) shrink-on tube (unshrinked) for your individual labels.The SC-Source MKII Highflex is available in black. The screen is protected by an insulating sleeve. For identification purposes we use removable colour code rings.Example SCCFF0500-SW-SW contents:5,00 m Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black (200-0101)1 x HI-X3CF-G-WOB1 x HICON Code ring for HICON XLR straight black (HI-XC-SW)0,05 x BTM095/TR1 x HI-X3CM-G-WOB1 x HICON Code ring for HICON XLR straight black (HI-XC-SW)0,05 x BTM095/TR
Variants from $39.67*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / XLR, HICON
$0.00*
SG0E
Our Stage 22 Highflex is a high-quality and budget-friendly microphone cable with a wire gauge of 2 x 0,22 mm² (AWG 24) in a 6.4 mm thick Super Soft PVC jacket and dense CU helical copper mesh with 99% optical coverage as well as a capacitance of 68pF/m (cond./cond.). It is filled with PVC almost all the way to the core and allows for excellent reeling.We will gladly produce your custom lengths on request!Example SG0E-0500-SW contents:5,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), angled, black (NC3FRX-BAG)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, black (NC3MXX-BAG)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from $52.78*
Microphone Cable SC-Source MKII Highflex, 2 x 0,25 mm² | XLR / XLR, NEUTRIK®
$0.00*
SCDYG
CABLE REELS– LOADED & PREWIREDWe supply a light-weight and very sturdy GT310 cable reel made by SCHILL which has a locking brake and a convenient carrying handle. It is loaded with our stage-proof and flexible SC-PRIMUS or SC-SOURCE microphone cables. The reel has a front panel and one NEUTRIK® NC3MDLX and NC3FDLX socket or connector resp., the cable is terminated with either an NC3MXX cable connector or the Convertcon NC3FM-C and a transparent shrink-on tube for your personal labelling.Example SCDYG1H00-BL contents:100,00 m Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; blue (200-0102)1 x SCHILL Kabeltrommel, GT310, core: 170 mm, thread width: 132 mm, Solid rubber (GT310)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), Type D M3, nickel (NC3FDLX-M3)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), Type D M3, nickel (NC3MDLX-M3)1 x Sommer cable Front panel with 4 D-holes (XLR, etc.) for GT310, HT with Core-Ø 240 and sk-model, grey (RUND04)0,05 x BTM095/TR1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)0,05 x BTM095/TR1 x Cable clamp for GT drums (GT-CABLECLIP)
Variants from $566.83*