HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black

HICON-XLR metal cap

Metal cap for all HICON-XLR connector

Shower singers should be happy now ...Over the new SC-AQUA MARINEX MIKRO 25 microphone cable for permanent underwater use. The SC-AQUA MARINEX MIKRO 25 microphone and AES/EBU cable is the standard installation line in wet zones like e.g. aquaparks or water oases. Not only does it ensure an excellent audio transmission, it also allows to trigger visual effects. Especially with longtime events such as lake night festivals, Christmas markets, sports events, in the theater sector or the demanding OB van technology the SC-AQUA MARINEX MIKRO 25 is the ideal connection. To arm it against the high water pressure as well as mechanical and electrical influences, we gave the wires an additional internal stabilization and fitted them with two tight braided screens which are insulated against each other, i.e. for safety reasons one screen may be applied to the shell of the XLR connector. Of course, the cables can also be used for standard sound reinforcement applications. They are somewhat more rigid than conventional PVC cables, yet almost indestructible.Advantages:Sea- and freshwater resistant outer jacket110 Ohm Impedance, AES / EBU, DMX 512Transversely watertight due to water-absorbing, pressure-compensating protective bandingHalogen-freeCold-flexible and reelableUV- and microbe-resistantShielded by two tight CU mesh screens, insulated against each otherApplication:Permanent laying in a maximum water depth of 50 mDemanding outdoor installation (e.g. with long-time events)Installation and usage near the coast and in boat-buildingIn- and outdoor installation in leisure parks and water oasesDigital control of visual effects

Shower singers should be happy now ...HIER FEHLT ETWAS! .... the new AQUA MARINEX microphone cable for permanent underwater use like e.g. in aquaparks or water oases. Not only does it provide an outstanding audio transmission, it can also handle the control of visual effects. In particular at longterm events such as lake night festivals, Christmas markets, sports events, in the theater sector or for the demanding OB van technology, the AQUA MARINEX is the ideal connection. In order to withstand the high water pressure as well as mechanical and electrical influences, we have given the inner wires an extra stabilization and also added two tight braided shields which are insulated against each other, i.e. for good measure one shield can be applied to the shell of the XLR connector. It is slightly more rigid than conventional PVC cables, yet almost indestructible.Advantages:Salt and fresh water resistant outer shell110 Ohm Impedance, AES / EBU, DMX 512Transversely watertight by water-absorbing, pressure-compensating guard bandHalogen-freeCold-flexible and reelableUV and microbe resistantShielded by two tight Cu braidsApplication:Permanent installation in water depths up to 20 mDemanding outdoor installation (e.g. with long-time events)Installation and usage near the coast and in boat-buildingIn- and outdoor installation in leisure parks and water oasesDigital control of visual effects

The hymns of praise by cable...Specialists make this cable a top seller. This microphone cable was originally developed for the makers of studio microphones. Their high quality standards helped us produce a professional and yet affordable studio microphone cable. SC-Source MKII is 100 % shielded by a tight Cu braid and a robust fleece woven around the wire pairs. The fleece is vaporized on both sides with a conductive aluminum coating. This ensures that even with heavy-duty use the 100 % shielding remains unchanged. This cable should be used where electric sources can affect the audio and data transfer. Cables with comparable electrical values cost almost twice as much with other manufacturers! Due to the fine 0.05 mm Cu wires it is a very popular cable for outdoor transmissions and mobile applications.Advantages:Neutral and loss-free audio transmission due to special copper strand design100 % shielding due to dense helical copper mesh screen plus extra AL fleece/AL foilProfessional technology at a budget priceAvailable in a notch- and cold-resistant PUR versionApplication:Professional studio and microphone technologyOutdoor transmission/OB vanPermanent stage application

One thick coat...Protects the inner structure against mechanical strain such as pulling, tearing and knotting. This is why we gave STAGE 22 a thick outer jacket of 6,40 mm. But also the electrical values and the technical construction are very presentable: the STAGE 22 has a low capacitance and high bending cycles, provided by the super thin, tightly stranded single wires. The shielding of bare Cu wires has an optical coverage of 99 % (instead of the otherwiseusual 85 %). The STAGE 22 is therefore the ideal cable for stage, homerecordists, renters and ELA technicians. The STAGE 22 is a very inexpensive cable, but you won't have to accept any trade-offs.Advantages:High transmission quality due to the usw of fine strandingVery rugged owing to the thick, soft PVC jacketGood shielding due to dence helical copper mesh screenHigh flexibility makes it easy to reelAffordable priceApplication:Stage applicationHome recording

When the lights begin to dance...the people stare in wonder! But there is quite a bit of technology behind it. And cables do not play the least important part here. The power for the spotlights and the control signals for their movements must be transmitted via cables. Both cables are combined in a robust cable hose, providing the input lead for the lighting desk and other DMX 512-equipped control devices. The SC-Monolith 1 POWER/DMX consists of a 3 x 1.50 mm² power cable and one DMX 512 line. Each DMX wire pair is shielded by a tinned helical copper mesh. The power cable was developed in compliance with VDE and has its own jacket for extra safety. Of course the AES/EBU cable can also be used as a microphone cable or as a feed line for active loudspeaker systems.Advantages:Parallel control for lighting boards through one cable via power line and DMX signalVery flexible and enormously tread-resistant due to the round jacket made of cotton and viscoseVery good pairwise shielding of the DMX lines due to tinned helical copper mesh screen or copper braidingMiscellaneous:Note: two white filling elements are integrated in the cable (see cable illustration)Application:Control line for DMX lighting consoles (wave impedance of 0 Ω)Analogue + digital audio multipair with power supply