The SYSPANEL5-XL allows the fast and easy construction of patch panels, device connection panels or transfer points, e.g. in control or equipment rooms.
The SYSPANEL5-XL can be fitted with up to 5 CARDINAL DVM 1 WU units (e.g. DVM-SYS-DIS, DVM-SYS-DISH, DVM-HDF4-FIBER-over-HDMI® or also SYSBOXX SYKP cassette profile), 5 SYSBOXX front panels (1 WU, SYFB21-…) or also 5 SYSBOXX connection modules (1B, SYC1-…), thus enabling the realization of modular 1 RU connection panels. The large housing depth also allows an easy integration of extender systems or format changers. The module fronts are integrated flush-mount into the housing front.
As a strain relief for the feed lines, the case offers 28 metal tongues for attaching cable ties. The case earthing (PE) is provided by an M4 ground screw.
The individual lettering can be done using our SYSBOXX labeling profile. Optionally the SYSPANEL can be closed from above with the cover (SYSPAN-C).
The labeling profile as well as the modules are fastened in a time-saving manner with self-tapping M2.5 Torx screws.
Advantages:
- High packing density on 1 RU
- Great variability due to a wide selection of front panels (e.g. for building a connection panel for media servers)
- Large installation depth for an easy integration of active electronics
- Flexible, fast equipping
- Subsequently alterable and thus future-proof
EAN: | 4049371272599 |
---|---|
Type: | SYSPANEL housing 19” for 5 x SYFB21/SYCFB21 front panel |
Back: | 28 metal reeds, M4-PE-bolts |
Depth [mm]: | 230 |
Height unit [HE]: | 1 |
EAN: | 4049371272599 |
---|---|
Type: | SYSPANEL housing 19” for 5 x SYFB21/SYCFB21 front panel |
Back: | 28 metal reeds, M4-PE-bolts |
Depth [mm]: | 230 |
Height unit [HE]: | 1 |
Modularly equippable 19“ 1 RU panel, made of zinc-plated and powder-coated sheet steel for flush-mount attachment of five CARDINAL DVM-modules, SYFB21 or SYC1 modules. Tray housing, closed on three sides with 228 mm of installation depth.
The large installation depth enables an easy integration of active electronics.
A labeling profile for holding 7 mm paper strips or 6 mm self-adhesive labeling strips can be fixed through pre-punched holes for taking up M2.5 self-tapping screws. Likewise a cover (2 x SYSPAN-C) can be mounted to seal the entire housing top.
The rear side offers 28 metal tongues as strain reliefs via cable ties plus an M4 grounding point.
Front panel thickness 2.5 mm
Dimensions: 483 x 230 x 44 mm
Color: RAL7016 powder labeling with fine-structure surface