EXCELSIOR® classique 1 CAT.7 Network Patch CableThe EXCELSIOR® classique 1 CAT.7 cable transmits digital sound and video information and is great for super fast 10 Gbit class F connections, pursuant to the approbations Fast Ethernet ATM 155 Prot., EN 50173 2ed, EN50288-1, EN 50288-5-1, IEC 61156-5 and ISO 11801 2ed.We carry out a thorough functional test with every EXCELSIOR® classique 1 CAT.7 cable and check the compliance with the relevant transmission values. The cable comes with a comprehensive 10 Gbit category 6a class F test report.Apart from its distinctive, noble braided jacket, the EXCELSIOR® classique 1 CAT.7 also excels by the use of high-quality all-metal RJ45-CAT.6A connectors with a special opening for large cable diameters which are indispensable for a 10 Gbit transmission pursuant to IEEE 802.3. Even long transmission paths are not a problem for the EXCELSIOR® classique 1 CAT.7.Miscellaneous:Capacity wire/wire at 1m : 42 pFInner conductor: 4 x 2 x AWG24Insulation: Cellular PE with Skin Layer100 % shielding: AL/PT foil per pair + overall Cu braidCAT.7 Cable / 600 MHz / 10 GbitDamping at 100 m (20 ° C): 18 dB @ 100 MHzConfiguration:

EXCELSIOR® classique 1 XLR 1 XLR cableThe EXCELSIOR® classique 1 XLR 1 consists of two combined, opposing wire pairs (crossover) with 4 x 0.20 mm² each. That way we achieved an extremely low capacitance of only 37 pF per meter which enables a super low-loss transmission (even with excess lengths). A tight stranding technique and fine, oxygen-free copper wires ensure a homogeneous, linear and pure sound image. Moreover, the cable has a tight multiple shielding with a 100 % degree of optical coverage. Each channel was equipped with a tin-plated helical CU screen and an AL/PT foil. In addition the cable has an overall screen of tin-plated CU cross-braiding. Thus the cable is perfectly protected against external interference.Miscellaneous:Wire-to-wire capacitance at 1 m: 37 pF (crossover)Inner conductor: 2 x 4 x 0.20 mm² (AWG24) with a 102 x 0.05 litz constructionInsulation: Foam / Skin-PE 1,5 mm100 % shielding: Tin-plated Cu braid (overall) and tin-plated CU spiral + AL/PT foil (wire pair)HICON XLR connector with gold-plated contacts.Configuration:

The EXCESLIOR ® classique SPK 2 consists of a pair of speaker cables, each with two twinaxially twisted wire pairs with a cross-section of 4.0 mm² (0.006 sq.in.) each. In addition to a super fast transient response and a punchy bass reproduction, the very tight braiding of the wire pairs and the use of extremely fine, oxygen-free Cu wires also ensure an optimum signal transmission even over long distances.Miscellaneous:Capacity wire / wire at 1m: 125 pFInner conductor: 2 x 4,0 mm² [AWG 11] with a stranding of 225 x 0.15 mmInsulation: PVC 3.5 mm4 mm hollow banana plug with beryllium coating, solderedSplice length: 15 cmConfiguration:

Configuration:

EXCELSIOR® classique 1 and 1 antenna cableWith a shielding factor of 125 dBs, made possible by a quadruple shielding with 2 carbon screens, a CU braid plus an aluminum-polyester foil, this antenna cable is ideally suitable for all current and future HD transmission technologies. It's mostly difficult to imagine a video enhancement by simply replacing the antenna cable. However, there are considerable differences in picture quality, notably with analog signals. Owing to the use of a solid AWG17 inner conductor of ultrapure class 6 OFC copper and the gas-injected Skin-PE insulation with a patented carbon design, the EXCELSIOR® classique 1 ANT 1 is particularly useful for digital, high-resolution HD SDI / HDTV media transmissions. The genuine gold-plated, multi-slotted HICON antenna connectors also ensure extremely low contact resistance values and a very high contact stability.Miscellaneous:Shielding: 125 dBInner conductor: 1 x 1.13 mm [AWG 17] Solid conductorInsulation: Foam / Skin-PE 5,0 mm100 % shielding: Tin-plated Cu braid + AL/PT foil + 2 x semiconductorsGenuine gold-plated, multi-slotted HICON antenna connectorsConfiguration:

EXCELSIOR® classique 1 HighSpeed HDMI cable with ethernet and audio return channel (ACR)The EXCELSIOR® classique 1 HighSpeed HDMI flat cable is ideally suitable for all future 3D and 4k transmissions. Compared to previous HDMI cables with a maximum resolution of 2560 x 1600 pixels, the resolution was increased to 3840 x 2160 pixels at 30 Hz or 4096 x 2160 pixels at 24 Hz respectively. And still the EXCELSIOR® classique 1 HighSpeed HDMI cable remains downward compatible with all previous HDMI versions and supports all current sound formats such as 8 PCM, Dolby Digital, MPEG, DTS, Dolby Digital Plus, TrueHD, dts-HD as well as DVD-Audio and SACD. As a special feature we have integrated a high-speed ethernet line which supports the network data rate with up to 100 Mbit/s. Owing to a back channel (audio return channel), sound signals of the DVB tuner can be transmitted directly from the TV set to the home cinema A/V receiver.Our EXCELSIOR® classique 1 HighSpeed HDMI cable is ideally ready for future generations of Blu-ray players, HD beamers, HD plasma or HD-(0) LED TV sets including 3D as well as all monitors, irrespective of the image refresh rate (100, 200, 600 Hz etc.).Miscellaneous:Max. data rate: 10,2 Gbit/sMax. resolution: 4096 x 2160 @ 24 HzInner conductor: AWG24100% shielding: copper braid + AL / PT-foilHDMI connector with 15 µm 24 K hard gold plated contacts, newly developed strain relief and improved cable kink protection, connector housing with optimized shielding design.Configuration: