Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black

One thick coat...

Protects the inner structure against mechanical strain such as pulling, tearing and knotting. This is why we gave STAGE 22 a thick outer jacket of 6,40 mm. But also the electrical values and the technical construction are very presentable: the STAGE 22 has a low capacitance and high bending cycles, provided by the super thin, tightly stranded single wires. The shielding of bare Cu wires has an optical coverage of 99 % (instead of the otherwiseusual 85 %). The STAGE 22 is therefore the ideal cable for stage, homerecordists, renters and ELA technicians. The STAGE 22 is a very inexpensive cable, but you won't have to accept any trade-offs.

Advantages:

  • High transmission quality due to the usw of fine stranding
  • Very rugged owing to the thick, soft PVC jacket
  • Good shielding due to dence helical copper mesh screen
  • High flexibility makes it easy to reel
  • Affordable price

Application:

  • Stage application
  • Home recording
Article number: 200-0001
Name: Stage 22 Highflex
EAN: 4049371001830
Properties: Analog, OFC oxygen free copper
Application area: Installation, Mobile outdoor / indoor, Stage / live
Application: Microphone Cable
Colour: black
Signal transmission: symmetrical
Construction: (2LI2Y0,22mm²)DY
Jacket material: PVC
Jacket Ø [mm]: 6,40
Jacket Ø ["]: 0.252
Number of Channels (audio): 1
Inner conductor (audio): 2
Inner conductor (audio) [mm²]: 0,22
Inner conductor (audio) [sqin]: 0.0003
Inner conductor Ø (audio) [mm]: 0,53
Inner conductor Ø (audio) ["]: 0.0209
AWG (audio): 24
Shielding: Copper spiral shielding with 0.10 mm indiv. strands
Shielding factor [%]: 99
Copper strands (audio): 28
Copper strand Ø (audio) [mm]: 0,10
Copper strand Ø (audio) ["]: 0.0039
Weight per 1 m [g]: 47
Weight at 1000 ft. [lbs]: 31.6271
UV-resistant: yes
Fire load per m [kWh]: 0,22
Style variant: round
Packing: 100 m spool, 500 m spool
Temperature min. [°C]: -20
Temperature max. [°C]: 70
Width [mm]: 6,4
Width ["]: 0.252
Height [mm]: 6,4
Height ["]: 0.252
Capac. cond./cond. per 1 m (audio) [pF]: 68
Capacity wire/wire at 1 ft. (audio) [pF]: 20.7264
Capac. cond./shield. per 1 m (audio) [pF]: 130
Capacity wire/electic screen at 1 ft. (audio) [pF]: 39.624
Impedance [Ω]: 100
Insulation resist. per 1 km [GΩ]: 1
Insulation resist. per 1000 feet [GΩ]: 0.3048
Insulation resist. per 1 km (audio) [GΩ]: 1
Insulation resist. per 1000 feet (audio) [GΩ]: 0.3048
Conductor resistance per 1 km [Ω]: 87
Conductor resistance per 1000 ft. [Ω]: 26.5176
Shield. resistance per 1 km [Ω]: 30
Shield. resistance per 1000 ft. [Ω]: 9.144
BPVo-Euroclass: Fca
Article number: 200-0001
Name: Stage 22 Highflex
EAN: 4049371001830
Properties: Analog, OFC oxygen free copper
Application area: Installation, Mobile outdoor / indoor, Stage / live
Application: Microphone Cable
Colour: black
Signal transmission: symmetrical
Construction: (2LI2Y0,22mm²)DY
Jacket material: PVC
Jacket Ø [mm]: 6,40
Jacket Ø ["]: 0.252
Number of Channels (audio): 1
Inner conductor (audio): 2
Inner conductor (audio) [mm²]: 0,22
Inner conductor (audio) [sqin]: 0.0003
Inner conductor Ø (audio) [mm]: 0,53
Inner conductor Ø (audio) ["]: 0.0209
AWG (audio): 24
Shielding: Copper spiral shielding with 0.10 mm indiv. strands
Shielding factor [%]: 99
Copper strands (audio): 28
Copper strand Ø (audio) [mm]: 0,10
Copper strand Ø (audio) ["]: 0.0039
Weight per 1 m [g]: 47
Weight at 1000 ft. [lbs]: 31.6271
UV-resistant: yes
Fire load per m [kWh]: 0,22
Style variant: round
Packing: 100 m spool, 500 m spool
Temperature min. [°C]: -20
Temperature max. [°C]: 70
Width [mm]: 6,4
Width ["]: 0.252
Height [mm]: 6,4
Height ["]: 0.252
Capac. cond./cond. per 1 m (audio) [pF]: 68
Capacity wire/wire at 1 ft. (audio) [pF]: 20.7264
Capac. cond./shield. per 1 m (audio) [pF]: 130
Capacity wire/electic screen at 1 ft. (audio) [pF]: 39.624
Impedance [Ω]: 100
Insulation resist. per 1 km [GΩ]: 1
Insulation resist. per 1000 feet [GΩ]: 0.3048
Insulation resist. per 1 km (audio) [GΩ]: 1
Insulation resist. per 1000 feet (audio) [GΩ]: 0.3048
Conductor resistance per 1 km [Ω]: 87
Conductor resistance per 1000 ft. [Ω]: 26.5176
Shield. resistance per 1 km [Ω]: 30
Shield. resistance per 1000 ft. [Ω]: 9.144
BPVo-Euroclass: Fca

Stage 22 Highflex

Microphone Cable

Advantages:

- High transmission quality due to the usw of fine stranding

- Very rugged owing to the thick, soft PVC jacket

- Good shielding due to dence helical copper mesh screen

- High flexibility makes it easy to reel

- Affordable price

Application:

- Stage application

- Home recording

Technical Data:

- Article number: 200-0001

- Name: Stage 22 Highflex

- EAN: 4049371001830

- Properties: OFC oxygen free copper

- Properties: Analog

- Application area: Installation

- Application area: Mobile outdoor / indoor

- Application area: Stage / live

- Application: Microphone Cable

- Colour: black

- Signal transmission: symmetrical

- Construction: (2LI2Y0,22mm²)DY

- Jacket material: PVC

- Jacket Ø: 6,40 mm

- Jacket Ø: 0.252 "

- Number of Channels (audio): 1

- Inner conductor (audio): 2

- Inner conductor (audio): 0,22 mm²

- Inner conductor (audio): 0.0003 sqin

- Inner conductor Ø (audio): 0,53 mm

- Inner conductor Ø (audio): 0.0209 "

- AWG (audio): 24

- Shielding: Copper spiral shielding with 0.10 mm indiv. strands

- Shielding factor: 99 %

- Copper strands (audio): 28

- Copper strand Ø (audio): 0,10 mm

- Copper strand Ø (audio): 0.0039 "

- Weight per 1 m: 47 g

- Weight at 1000 ft.: 31.6271 lbs

- UV-resistant: yes

- Fire load per m: 0,22 kWh

- Style variant: round

- Packing: 500 m spool

- Packing: 100 m spool

- Temperature min.: -20 °C

- Temperature max.: 70 °C

- Width: 6,4 mm

- Width: 0.252 "

- Height: 6,4 mm

- Height: 0.252 "

- Capac. cond./cond. per 1 m (audio): 68 pF

- Capacity wire/wire at 1 ft. (audio): 20.7264 pF

- Capac. cond./shield. per 1 m (audio): 130 pF

- Capacity wire/electic screen at 1 ft. (audio): 39.624 pF

- Impedance: 100 Ω

- Insulation resist. per 1 km: 1 GΩ

- Insulation resist. per 1000 feet: 0.3048 GΩ

- Insulation resist. per 1 km (audio): 1 GΩ

- Insulation resist. per 1000 feet (audio): 0.3048 GΩ

- Conductor resistance per 1 km: 87 Ω

- Conductor resistance per 1000 ft.: 26.5176 Ω

- Shield. resistance per 1 km: 30 Ω

- Shield. resistance per 1000 ft.: 9.144 Ω

- BPVo-Euroclass: Fca

Accessories 200-0001

HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black

HI-J35S02

Little big manThe 3.5 mm (1/8“) mini jack connectors can be used on countless compact devices like MP3 players, sound cards, bodypacks etc. Here the HICON range offers a wide array of special features such as those versions• HI-J35S-SCREW-M/-Fwith screw lock for mobile applications (e.g. bodypacks)• HI-J35S02/T02 with big cable holder (for twin cables, thick cables)• HI-J35S03 with compact design• HI-J35M04/S04 with chuck strain relief (for high tensile forces)• HI-J3563S with 6.3 mm (1/4“) screw adapter (for headphones etc.)• HI-J35SA, 90° angledAll variants have genuine gold-plated solid pins and come with a 5-year warranty.
€8.70*
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black

HI-X3CF-HD-B

A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
€7.97*
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black

HI-X3CM-HD-B

A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
€7.10*

Related products 200-0001

Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, NEUTRIK®

SGN5

The Stage 22 Highflex is a high-quality, very reasonably priced cable with a wire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket. It is filled with PVC almost all the way to the core and allows for excellent reeling. We supply it with NEUTRIK® NP3X jack connector and NC3FXX XLR connectors.Example SGN5-0100-SW contents:1,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €34.00*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, NEUTRIK®

SG75

The Stage 22 Highflex is a high-quality and yet economically priced cable with a wire cross-section of 2 x 0,22 mm² (AWG 24) and a thick 6.4 mm Super Soft PVC jacket. It is molded with PVC almost to the core and has excellent reeling and winding properties. We supply this cable with NEUTRIK® connectorsExample SG75-0500-SW contents:5,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €29.50*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, NEUTRIK®

SGN4

The Stage 22 Highflex is a high-quality, very reasonably priced cable with a wire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket. It is filled with PVC almost all the way to the core and allows for excellent reeling. We supply it with NEUTRIK® NP3X jack connector and NC3MXX XLR connectors.Example SGN4-0250-SW contents:2,50 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €33.00*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / XLR, NEUTRIK®

SG01

The Stage 22 Highflex is a high-quality and very inexpensive cable wioth a wire cross-section of 2 x 0,22 mm² (AWG 24) and a 6.4 mm (0.25 in.) thick super soft PVC jacket. It is PVC injected almost down to the core and perfectly easy to drum and wind. Comes with NEUTRIK® NC3MX or NC3FX XLR connectors.Example SG01-0600-SW contents:6,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FX)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MX)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €31.50*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, HICON

SGFD

The Stage 22 Highflex is a high-quality, very reasonably priced cable with a wire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket. It is filled with PVC almost all the way to the core and allows for excellent reeling. We supply it with HICON HI-J63S03 jack connector and HI-X3CM-M XLR connector.Example SGFD-0300-SW contents:3,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated pin, straight, black (HI-J63S03)1 x HICON XLR PRO+, 3-pole male, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CM-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x Cardboard packaging for blister hooks, Design Groove+
Variants from €29.00*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / XLR, NEUTRIK®

SGMFU

The Stage 22 Highflex is a high-quality and very inexpensive cable with a wire cross-section of 2 x 0,22 mm² (AWG 24) and a 6.4 mm (0.25 in.) thick super soft PVC jacket. It is PVC injected almost down to the core and perfectly easy to drum and wind. We deliver the SGMFU version offered here with NEUTRIK® NC3MXX or NC3FXX XLR connectors and a 5 cm (2“) piece of clear shrinking tube (unshrunk) on either side for your individual lettering.Example SGMFU1000-SW contents:10,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)0,05 x BTM095/TR1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)0,05 x BTM095/TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €38.50*
€0.00*
Sommer cable Adapter cable | XLR 3-pole male straight

SGHWU

On the road again…and once again the (rented) sound system of the local organiser offers the most adventurous connections that just won’t match with our equipment. With our handy ROAD-ADAPTERNS you will spare yourself from time-consuming “soldering arias“ and bricolage before the soundcheck or gig. Our ROAD-ADAPTERNShave a z.B. 0,15m cable and are therefore extremely flexible, especially where rigid adapters will fail due to their installation depth. They fit into the narrowest of rack connections and almost any connection standard. We have surrounded the connection lead of our ROAD-ADAPTERNS with an unshrinked transparent shrink-on tube for you so that you can label your adapter as you please.Miscellaneous:Configuration: 3-pole, 1:1Example SGHWU0015-SW contents:0,15 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON XLR PRO+, 3-pole male, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CM-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x HICON XLR PRO+, 3-pole male, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CM-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)0,03 x BTM095/TR1 x KARTONAGE-SCMINI
Variants from €27.00*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, HICON

SGFG

The Stage 22 Highflex is a high-quality, very reasonably priced cable with a wire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket. It is filled with PVC almost all the way to the core and allows for excellent reeling. We supply it with HICON HI-J63S03 jack connector and HI-X3CF XLR connector.Example SGFG-0300-SW contents:3,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated pin, straight, black (HI-J63S03)1 x HICON XLR PRO+, 3-pole female, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CF-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x Cardboard packaging for blister hooks, Design Groove+
Variants from €28.50*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, NEUTRIK®

SG79

The Stage 22 Highflex is a high-quality and yet economically priced cable with a wire cross-section of 2 x 0,22 mm² (AWG 24) and a thick 6.4 mm Super Soft PVC jacket. It is molded with PVC almost to the core and has excellent reeling and winding properties. We supply this cable with NEUTRIK® connectorsExample SG79-0250-SW contents:2,50 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €30.50*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / XLR, HICON

SGCE

Our Stage 22 Highflex is a high-quality and budget-friendly microphone cable with a wire gauge of 2 x 0,22 mm² (AWG 24) in a 6.4 mm thick Super Soft PVC jacket and dense CU helical copper mesh with 99% optical coverage as well as a capacitance of 68pF/m (cond./cond.). It is filled with PVC almost all the way to the core and allows for excellent reeling.We will gladly produce your custom lengths on request!Example SGCE-0600-SW contents:6,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON XLR PRO+, 3-pole female, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CF-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x HICON XLR PRO+, 3-pole male, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CM-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x Cardboard packaging for blister hooks, Design Groove+
Variants from €27.00*
€0.00*
Sommer cable Adapter cable | jack male 6,3 mm stereo/XLR 3-pole female straight

SGFGU

On the road again…and once again the (rented) sound system of the local organiser offers the most adventurous connections that just won’t match with our equipment. With our handy ROAD-ADAPTERNS you will spare yourself from time-consuming “soldering arias“ and bricolage before the soundcheck or gig. Our ROAD-ADAPTERNShave a z.B. 0,15m cable and are therefore extremely flexible, especially where rigid adapters will fail due to their installation depth. They fit into the narrowest of rack connections and almost any connection standard. We have surrounded the connection lead of our ROAD-ADAPTERNS with an unshrinked transparent shrink-on tube for you so that you can label your adapter as you please.Miscellaneous:Configuration: 3-pole, Pin 1-Gnd./Pin 2-Tip/Pin 3-RingExample SGFGU0015-SW contents:0,15 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated pin, straight, black (HI-J63S03)1 x HICON XLR PRO+, 3-pole female, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CF-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)0,03 x BTM095/TR1 x KARTONAGE-SCMINI
Variants from €28.00*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / XLR, HICON

SGHN

Our Stage 22 Highflex is a high-quality and budget-friendly microphone cable with a wire gauge of 2 x 0,22 mm² (AWG 24) in a 6.4 mm thick Super Soft PVC jacket and dense CU helical copper mesh with 99% optical coverage as well as a capacitance of 68pF/m (cond./cond.). It is filled with PVC almost all the way to the core and allows for excellent reeling.We will gladly produce your custom lengths on request!Example SGHN-0500-SW contents:5,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON XLR BASIC, 3-pole female, silver-plated contacts, nickel-plated metal housing, conductive surface, black plastic cap, 3-chuck collet strain relief (HI-X3CF-V)1 x HICON Plastic cap, Metal cap for all HICON-XLR connector, plastic (HI-XC-CAP-P)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x HICON XLR BASIC, 3-pole male, silver-plated contacts, nickel-plated metal housing, conductive surface, black plastic cap, 3-chuck collet strain relief (HI-X3CM-V)1 x HICON Plastic cap, Metal cap for all HICON-XLR connector, plastic (HI-XC-CAP-P)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x KARTONAGE-BASIC
Variants from €20.50*
€0.00*
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / XLR, NEUTRIK®

SGMF

Our Stage 22 Highflex is a high-quality and budget-friendly microphone cable with a wire gauge of 2 x 0,22 mm² (AWG 24) in a 6.4 mm thick Super Soft PVC jacket and dense CU helical copper mesh with 99% optical coverage as well as a capacitance of 68pF/m (cond./cond.). It is filled with PVC almost all the way to the core and allows for excellent reeling.We will gladly produce your custom lengths on request!Example SGMF-1000-SW contents:10,00 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €31.00*
€0.00*
Sommer cable Adapter cable | XLR 3-pole male/XLR 3-pole female straight, grey

SGZ9-20-200

On the road again…and once again the (rented) sound system of the local organiser offers the mostadventurous connections that just won’t match with our equipment. With our handyROAD ADAPTERS you will spare yourself from time-consuming “solderingarias“ and bricolage before the soundcheck or gig. Our ROAD ADAPTERShave a z.B. 0,20m cable and are therefore extremely flexible, especially whererigid adapters will fail due to their installation depth. They fit into the narrowest ofrack connections and almost any connection standard. We have surrounded the connection lead of our ROAD ADAPTERS with an unshrinked transparent shrink-on tube for you (except for the “free end“ version) so that you can label your adapter as you please.With the Adapter cable damping pad the signal level is lowered by 20 dBu. Ideal for mobile recording units in environments with extreme SPLs. The impedance has been fixed at 200 Ω.Miscellaneous:Configuration: 3-Pol, 1:1Example SGZ9-20-200-0020 contents:0,20 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)6 x LOHN-MIN-INT1 x KARTONAGE-SCMINI
Variants from €85.00*
€0.00*
Sommer cable Adapter cable | jack male 6,3 mm stereo/XLR 3-pole male straight

SGFDU

On the road again…and once again the (rented) sound system of the local organiser offers the most adventurous connections that just won’t match with our equipment. With our handy ROAD-ADAPTERNS you will spare yourself from time-consuming “soldering arias“ and bricolage before the soundcheck or gig. Our ROAD-ADAPTERNShave a z.B. 0,15m cable and are therefore extremely flexible, especially where rigid adapters will fail due to their installation depth. They fit into the narrowest of rack connections and almost any connection standard. We have surrounded the connection lead of our ROAD-ADAPTERNS with an unshrinked transparent shrink-on tube for you so that you can label your adapter as you please.Miscellaneous:Configuration: 3-pole, Pin 1-Gnd./Pin 2-Tip/Pin 3-RingExample SGFDU0015-SW contents:0,15 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated pin, straight, black (HI-J63S03)1 x HICON XLR PRO+, 3-pole male, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CM-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)0,03 x BTM095/TR1 x KARTONAGE-SCMINI
Variants from €28.50*
€0.00*
Sommer cable Adapter cable | XLR 3-pole female straight

SGHZU

On the road again…and once again the (rented) sound system of the local organiser offers the most adventurous connections that just won’t match with our equipment. With our handy ROAD-ADAPTERNS you will spare yourself from time-consuming “soldering arias“ and bricolage before the soundcheck or gig. Our ROAD-ADAPTERNShave a z.B. 0,15m cable and are therefore extremely flexible, especially where rigid adapters will fail due to their installation depth. They fit into the narrowest of rack connections and almost any connection standard. We have surrounded the connection lead of our ROAD-ADAPTERNS with an unshrinked transparent shrink-on tube for you so that you can label your adapter as you please.Miscellaneous:Configuration: 3-pole, 1:1Example SGHZU0015-SW contents:0,15 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON XLR PRO+, 3-pole female, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CF-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x HICON XLR PRO+, 3-pole female, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CF-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)0,03 x BTM095/TR1 x KARTONAGE-SCMINI
Variants from €26.50*
€0.00*
Insert cable balanced Stage 22 Highflex, 2 x 0,22 mm² | jack 90° / jack 90°, HICON

SG3P

The Stage 22 Highflex is a high-quality and yet economically priced cable with a wire cross-section of 2 x 0,22 mm² (AWG 24) and a thick 6.4 mm Super Soft PVC jacket. It is molded with PVC almost to the core and has excellent reeling and winding properties. We supply this cable with HICON HI-J63SA04Example SG3P-0050-SW contents:0,50 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, angled, black (HI-J63SA04)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, angled, black (HI-J63SA04)1 x KARTONAGE-SCMINI
Variants from €32.00*
€0.00*
Loading...
Upload in progress, please be patient ...