Microphone Cable SC-AQUA MARINEX MIKRO; 2 x 0.14 mm²; black
200-0141AQ
€5.88*
Base price:
€5.88* / m
(includes €1.50* handling fee)
Base price:
€5.88* / m
Downloads
Shower singers should be happy now ...
HIER FEHLT ETWAS! .... the new AQUA MARINEX microphone cable for permanent underwater use like e.g. in aquaparks or water oases. Not only does it provide an outstanding audio transmission, it can also handle the control of visual effects. In particular at longterm events such as lake night festivals, Christmas markets, sports events, in the theater sector or for the demanding OB van technology, the AQUA MARINEX is the ideal connection. In order to withstand the high water pressure as well as mechanical and electrical influences, we have given the inner wires an extra stabilization and also added two tight braided shields which are insulated against each other, i.e. for good measure one shield can be applied to the shell of the XLR connector. It is slightly more rigid than conventional PVC cables, yet almost indestructible.
Advantages:
- Salt and fresh water resistant outer shell
- 110 Ohm Impedance, AES / EBU, DMX 512
- Transversely watertight by water-absorbing, pressure-compensating guard band
- Halogen-free
- Cold-flexible and reelable
- UV and microbe resistant
- Shielded by two tight Cu braids
Application:
- Permanent installation in water depths up to 20 m
- Demanding outdoor installation (e.g. with long-time events)
- Installation and usage near the coast and in boat-building
- In- and outdoor installation in leisure parks and water oases
- Digital control of visual effects
| Article number: | 200-0141AQ |
|---|---|
| Name: | SC-AQUA MARINEX MIKRO |
| EAN: | 4049371315906 |
| Brand: | Sommer cable |
| Properties: | Analog, Digital 110 Ω AES / EBU, Halogen-free / LSZH, PUR, Underwater / submerged |
| Application area: | ELA 100 V, Installation, Mobile outdoor / indoor, Stage / live |
| Application: | Microphone Cable |
| Colour: | black |
| Jacket material (AES/EBU, DMX): | PUR-SR |
| Jacket Ø (AES/EBU, DMX) [mm]: | 4,60 |
| Jacket Ø (AES/EBU, DMX) ["]: | 0.1811 |
| Inner conductor (AES/EBU, DMX): | 2 |
| Inner conductor (AES/EBU, DMX) [mm²]: | 0,14 |
| Inner conductor (AES/EBU, DMX) [sqin]: | 0.0002 |
| Shielding (AES/EBU, DMX): | Copper spiral + special protective bandage |
| Shielding factor [%]: | 95 |
| Copper strands (AES/EBU, DMX): | 18 |
| Copper strand Ø (AES/EBU, DMX) [mm]: | 0,10 |
| Copper strand Ø (AES/EBU, DMX) ["]: | 0.0039 |
| Conductor insulation material (AES/EBU, DMX): | PVC |
| Conductor insulation Ø (AES/EBU, DMX) [mm]: | 0,00 |
| Conductor insulation Ø (AES/EBU, DMX) ["]: | 0 |
| Weight per 1 m [g]: | 33 |
| Weight at 1000 ft. [lbs]: | 20.1875 |
| Fire load per m [kWh]: | 0,18 |
| Packing: | bulk stock |
| Temperature min. [°C]: | -40 |
| Temperature max. [°C]: | 80 |
| Max. water depth [m]: | 20 |
| Max. water depth [ft]: | 65.6168 |
| Max. water pressure [bar]: | 2 |
| Capac. cond./cond. per 1 m (AES/EBU, DMX) [pF]: | 65 |
| Capacity wire/wire at 1 ft. (AES/EBU, DMX) [pF]: | 19.812 |
| Capac. cond./shield. per 1 m (AES/EBU, DMX) [pF]: | 190 |
| Capacity wire/electic screen at 1 ft. (AES/EBU, DMX) [pF]: | 57.912 |
| Surge impedance (AES/EBU, DMX) [Ω]: | 110 |
| Insulation resist. per 1 km (AES/EBU, DMX) [GΩ]: | 1 |
| Insulation resist. per 1000 feet (AES/EBU, DMX) [GΩ]: | 0.3048 |
| Conductor resistance per 1 km (AES/EBU, DMX) [Ω]: | 141 |
| Conductor resistance per 1000 ft. (AES/EBU, DMX) [Ω]: | 42.9768 |
| Shield. resistance per 1 km [Ω]: | 29,1 |
| Shield. resistance per 1000 ft. [Ω]: | 8.8697 |
| Available since: | V07.1 |
| BPVo-Euroclass: | Fca |
| Article number: | 200-0141AQ |
|---|---|
| Name: | SC-AQUA MARINEX MIKRO |
| EAN: | 4049371315906 |
| Brand: | Sommer cable |
| Properties: | Analog, Digital 110 Ω AES / EBU, Halogen-free / LSZH, PUR, Underwater / submerged |
| Application area: | ELA 100 V, Installation, Mobile outdoor / indoor, Stage / live |
| Application: | Microphone Cable |
| Colour: | black |
| Jacket material (AES/EBU, DMX): | PUR-SR |
| Jacket Ø (AES/EBU, DMX) [mm]: | 4,60 |
| Jacket Ø (AES/EBU, DMX) ["]: | 0.1811 |
| Inner conductor (AES/EBU, DMX): | 2 |
| Inner conductor (AES/EBU, DMX) [mm²]: | 0,14 |
| Inner conductor (AES/EBU, DMX) [sqin]: | 0.0002 |
| Shielding (AES/EBU, DMX): | Copper spiral + special protective bandage |
| Shielding factor [%]: | 95 |
| Copper strands (AES/EBU, DMX): | 18 |
| Copper strand Ø (AES/EBU, DMX) [mm]: | 0,10 |
| Copper strand Ø (AES/EBU, DMX) ["]: | 0.0039 |
| Conductor insulation material (AES/EBU, DMX): | PVC |
| Conductor insulation Ø (AES/EBU, DMX) [mm]: | 0,00 |
| Conductor insulation Ø (AES/EBU, DMX) ["]: | 0 |
| Weight per 1 m [g]: | 33 |
| Weight at 1000 ft. [lbs]: | 20.1875 |
| Fire load per m [kWh]: | 0,18 |
| Packing: | bulk stock |
| Temperature min. [°C]: | -40 |
| Temperature max. [°C]: | 80 |
| Max. water depth [m]: | 20 |
| Max. water depth [ft]: | 65.6168 |
| Max. water pressure [bar]: | 2 |
| Capac. cond./cond. per 1 m (AES/EBU, DMX) [pF]: | 65 |
| Capacity wire/wire at 1 ft. (AES/EBU, DMX) [pF]: | 19.812 |
| Capac. cond./shield. per 1 m (AES/EBU, DMX) [pF]: | 190 |
| Capacity wire/electic screen at 1 ft. (AES/EBU, DMX) [pF]: | 57.912 |
| Surge impedance (AES/EBU, DMX) [Ω]: | 110 |
| Insulation resist. per 1 km (AES/EBU, DMX) [GΩ]: | 1 |
| Insulation resist. per 1000 feet (AES/EBU, DMX) [GΩ]: | 0.3048 |
| Conductor resistance per 1 km (AES/EBU, DMX) [Ω]: | 141 |
| Conductor resistance per 1000 ft. (AES/EBU, DMX) [Ω]: | 42.9768 |
| Shield. resistance per 1 km [Ω]: | 29,1 |
| Shield. resistance per 1000 ft. [Ω]: | 8.8697 |
| Available since: | V07.1 |
| BPVo-Euroclass: | Fca |
SC-AQUA MARINEX MIKRO
Microphone Cable
Advantages:
- Salt and fresh water resistant outer shell
- 110 Ohm Impedance, AES / EBU, DMX 512
- Transversely watertight by water-absorbing, pressure-compensating guard band
- Halogen-free
- Cold-flexible and reelable
- UV and microbe resistant
- Shielded by two tight Cu braids
Application:
- Permanent installation in water depths up to 20 m
- Demanding outdoor installation (e.g. with long-time events)
- Installation and usage near the coast and in boat-building
- In- and outdoor installation in leisure parks and water oases
- Digital control of visual effects
Technical Data:
- Article number: 200-0141AQ
- Name: SC-AQUA MARINEX MIKRO
- EAN: 4049371315906
- Brand: Sommer cable
- Properties: PUR
- Properties: Halogen-free / LSZH
- Properties: Underwater / submerged
- Properties: Digital 110 Ω AES / EBU
- Properties: Analog
- Application area: Stage / live
- Application area: Mobile outdoor / indoor
- Application area: Installation
- Application area: ELA 100 V
- Application: Microphone Cable
- Colour: black
- Jacket material (AES/EBU, DMX): PUR-SR
- Jacket Ø (AES/EBU, DMX): 4,60 mm
- Jacket Ø (AES/EBU, DMX): 0.1811 "
- Inner conductor (AES/EBU, DMX): 2
- Inner conductor (AES/EBU, DMX): 0,14 mm²
- Inner conductor (AES/EBU, DMX): 0.0002 sqin
- Shielding (AES/EBU, DMX): Copper spiral + special protective bandage
- Shielding factor: 95 %
- Copper strands (AES/EBU, DMX): 18
- Copper strand Ø (AES/EBU, DMX): 0,10 mm
- Copper strand Ø (AES/EBU, DMX): 0.0039 "
- Conductor insulation material (AES/EBU, DMX): PVC
- Conductor insulation Ø (AES/EBU, DMX): 0,00 mm
- Conductor insulation Ø (AES/EBU, DMX): 0 "
- Weight per 1 m: 30 g
- Weight at 1000 ft.: 20.1875 lbs
- Fire load per m: 0,18 kWh
- Packing: bulk stock
- Temperature min.: -40 °C
- Temperature max.: 80 °C
- Max. water depth: 20 m
- Max. water depth: 65.6168 ft
- Max. water pressure: 2 bar
- Capac. cond./cond. per 1 m (AES/EBU, DMX): 65 pF
- Capacity wire/wire at 1 ft. (AES/EBU, DMX): 19.812 pF
- Capac. cond./shield. per 1 m (AES/EBU, DMX): 190 pF
- Capacity wire/electic screen at 1 ft. (AES/EBU, DMX): 57.912 pF
- Surge impedance (AES/EBU, DMX): 110 Ω
- Insulation resist. per 1 km (AES/EBU, DMX): 1 GΩ
- Insulation resist. per 1000 feet (AES/EBU, DMX): 0.3048 GΩ
- Conductor resistance per 1 km (AES/EBU, DMX): 141 Ω
- Conductor resistance per 1000 ft. (AES/EBU, DMX): 42.9768 Ω
- Shield. resistance per 1 km: 29,1 Ω
- Shield. resistance per 1000 ft.: 8.8697 Ω
- Available since: V07.0
- BPVo-Euroclass: Fca
Related products 200-0141AQ
Microphone Cable SC-AQUA MARINEX, 2 x 0,14 mm² | XLR / XLR, HICON
€0.00*
AMBQ
The AES/EBU-compliant SC-AQUA MARINEX MIKRO14 with a capacitance of 65pF/m (core/core) has a core cross-section of 2 x 0.14 mm² in a 4.6 mm thin PUR sheath including special protective taping. The cable is precisely matched to the HICON HI-MARLIN connectors and guarantees watertightness in accordance with IP67 when used together. In this combination, the cable is ideal for (outdoor) use in amusement parks, in ship and boat building or at outdoor events such as Christmas markets or lake festivals.Advantages:Waterproofed and dust protected while connectedExample AMBQ-2000-SW contents:20,00 m Microphone Cable SC-AQUA MARINEX MIKRO; 2 x 0,14 mm²; black (200-0141AQ)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black (HI-X3CF-HD-B)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black (HI-X3CM-HD-B)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €49.50*
Microphone Cable SC-AQUA MARINEX, 2 x 0,14 mm² | XLR / XLR, HICON
€0.00*
AMS1
Here we match our microphone cable of the transversely watertight SC-AQUA MARINEX cable series with the splashproof IP67 rated XLR connectors from NEUTRIK®. That way the cable is perfectly suited for laying in wet areas like e.g. aqua parks or water wellness oases or also for use at events such as lake festivals, Christmas markets or sporting events.Advantages:Waterproofed and dust protected while connectedExample AMS1-0100-WS contents:1,00 m Microphone Cable SC-AQUA MARINEX MIKRO; 2 x 0,14 mm²; white (200-0140AQ)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, silver plated contact(s), straight, nickel (HI-X3CF-HD)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, silver plated contact(s), straight, nickel (HI-X3CM-HD)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €46.90*
Accessories 200-0141AQ
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, silver plated contact(s), straight, nickel
€7.07*
HI-X3CF-HD
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black
€7.97*
HI-X3CF-HD-B
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, silver plated contact(s), straight, nickel
€6.20*
HI-X3CM-HD
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black
€7.10*
HI-X3CM-HD-B
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas