HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black

A true all-rounder...

is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.

These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.

Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly.

These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.

The HICON HI-MARLIN XLR connectors are salt water and UV resistant.

Advantages:

  • No infiltration of water, dirt, moisture, sand
  • Water- and dustproof according to IP67 while connected
  • Very good handling with pleasant plug-in sensation
  • AES/EBU conform (no vibration sensor)
  • Especially cable-protecting strain relief
  • High mating cycles due to intelligent, zero-wear locking mechanism
  • Easy and fast assemble

Application:

  • Installation at outdoor events, in ship and boat building, skiing events etc.
  • Permanent connections in coastal areas
Article number: HI-X3CM-HD-B
Name: HI-MARLIN
EAN: 4049371810432
Brand: HICON
Application: audio
Colour: black
Model: XLR
Style variant: straight
Gender: male
Material: metal
Pole number: 3-pole
Connector / Socket: male connector
Contact coating: gold plated
Mounting: Cable
Cable diameter min. [mm]: 4,6
Cable diameter min. ["]: 0.1811
Max. cable diameter [mm]: 6,5
Max. cable diameter ["]: 0.2559
Protection: water- and dustproof IP67 while connected
Article number: HI-X3CM-HD-B
Name: HI-MARLIN
EAN: 4049371810432
Brand: HICON
Application: audio
Colour: black
Model: XLR
Style variant: straight
Gender: male
Material: metal
Pole number: 3-pole
Connector / Socket: male connector
Contact coating: gold plated
Mounting: Cable
Cable diameter min. [mm]: 4,6
Cable diameter min. ["]: 0.1811
Max. cable diameter [mm]: 6,5
Max. cable diameter ["]: 0.2559
Protection: water- and dustproof IP67 while connected

HICON XLR, 3-pole , metal-male connector, gold plated contact(s), straight, black

Technical Data:

- Article number: HI-X3CM-HD-B

- Name: HI-MARLIN

- EAN: 4049371810432

- Brand: HICON

- Application: audio

- Colour: black

- Model: XLR

- Style variant: straight

- Gender: male

- Material: metal

- Pole number: 3-pole

- Connector / Socket: male connector

- Contact coating: gold plated

- Mounting: Cable

- Cable diameter min.: 4,6 mm

- Cable diameter min.: 0.1811 "

- Max. cable diameter: 6,5 mm

- Max. cable diameter: 0.2559 "

- Protection: water- and dustproof IP67 while connected

Related products HI-X3CM-HD-B

Microphone Cable SC-Source MKII Highflex, 2 x 0,25 mm² | XLR / XLR, HICON

SCBQU

The SC-Source MKII Highflex is the perfect cable for demanding radio engineers.It has a wire cross-section of 2 x 0,25 mm² and superfine 0.05 mm OFC copper strands! It is very easy to reel and guarantees high bending cycles. The SC-Source MKII Highflex has a dual shielding (aluminised fleece + braided Cu mesh screen) with 100 % optical coverage and remains totally noiseand pop-free even with problematic requirements. Due to the use of a chalk-free soft PVC it is very cold-resistant. We supply this cable with gold-plated HICON and NEUTRIK® connectors and a transparent 2“ (5 cm) shrink-on tube (unshrinked) for your individual labels.The SC-Source MKII Highflex is available in black. The screen is protected by an insulating sleeve. For identification purposes we use removable colour code rings.Example SCBQU2000-SW contents:20,00 m Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black (200-0101)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black (HI-X3CF-HD-B)0,05 x BTM095/TR1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black (HI-X3CM-HD-B)0,05 x BTM095/TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €36.00*
€0.00*
Microphone Cable SC-AQUA MARINEX, 2 x 0,25 mm² | XLR / XLR, HICON

AGBQ

Here we combine our microphone cable of the transversely watertight SC-AQUA MARINEX cable series with the IP67 splash-proof XLR connectors from HICON. The cable is therefore perfectly suitable for laying in wet areas like e.g. aquaparks or water oases or else for use at events such as lake night festivals, Christmas markets or sporting events.Advantages:Waterproofed and dust protected while connectedExample AGBQ-0100-SW contents:1,00 m Microphone cable AES/EBU SC-AQUA MARINEX MIKRO 25; 2 x 0,25 mm²; PUR-SR Ø 7,20 mm; black (200-0241AQ)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black (HI-X3CF-HD-B)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black (HI-X3CM-HD-B)1 x Cardboard packaging for blister hooks, Design Sommer cable
€0.00*
Input merger | eventCon / XLR 3-pole + Schuko, HICON

MHKQ

Example MHKQ-M01/00-0050 contents:0,50 m SC-Monolith 1; power: 3 x 1.50 mm²; DMX: 1 x 2 x 0.25 mm²; PVC Ø 13,00 mm; black (500-0051-1)1 x Mennekes SCHUKO, 2-pole , plastic-, screw-type-male connector, nickel plated contact(s), straight, max. 2,5 mm², black (SCHU-MC230/16PSW)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black (HI-X3CM-HD-B)1 x eventCON , IP67 , 3-pole female connector, straight, black (EC-PD1F)
Variants from €128.00*
€0.00*
Microphone Cable SC-AQUA MARINEX, 2 x 0,14 mm² | XLR / XLR, HICON

AMBQ

The AES/EBU-compliant SC-AQUA MARINEX MIKRO14 with a capacitance of 65pF/m (core/core) has a core cross-section of 2 x 0.14 mm² in a 4.6 mm thin PUR sheath including special protective taping. The cable is precisely matched to the HICON HI-MARLIN connectors and guarantees watertightness in accordance with IP67 when used together. In this combination, the cable is ideal for (outdoor) use in amusement parks, in ship and boat building or at outdoor events such as Christmas markets or lake festivals.Advantages:Waterproofed and dust protected while connectedExample AMBQ-2000-SW contents:20,00 m Microphone Cable SC-AQUA MARINEX MIKRO; 2 x 0,14 mm²; black (200-0141AQ)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black (HI-X3CF-HD-B)1 x HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black (HI-X3CM-HD-B)1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €49.50*
€0.00*

Accessories HI-X3CM-HD-B

Microphone Cable SC-AQUA MARINEX MIKRO; 2 x 0.14 mm²; black

200-0141AQ

Shower singers should be happy now ...HIER FEHLT ETWAS! .... the new AQUA MARINEX microphone cable for permanent underwater use like e.g. in aquaparks or water oases. Not only does it provide an outstanding audio transmission, it can also handle the control of visual effects. In particular at longterm events such as lake night festivals, Christmas markets, sports events, in the theater sector or for the demanding OB van technology, the AQUA MARINEX is the ideal connection. In order to withstand the high water pressure as well as mechanical and electrical influences, we have given the inner wires an extra stabilization and also added two tight braided shields which are insulated against each other, i.e. for good measure one shield can be applied to the shell of the XLR connector. It is slightly more rigid than conventional PVC cables, yet almost indestructible.Advantages:Salt and fresh water resistant outer shell110 Ohm Impedance, AES / EBU, DMX 512Transversely watertight by water-absorbing, pressure-compensating guard bandHalogen-freeCold-flexible and reelableUV and microbe resistantShielded by two tight Cu braidsApplication:Permanent installation in water depths up to 20 mDemanding outdoor installation (e.g. with long-time events)Installation and usage near the coast and in boat-buildingIn- and outdoor installation in leisure parks and water oasesDigital control of visual effects
€5.88*
HICON Metal cap, HICON-XLR metal cap, metal

HI-XCAP

HICON-XLR metal cap
Variants from €1.65*
€0.00*
Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black

200-0101

The hymns of praise by cable...Specialists make this cable a top seller. This microphone cable was originally developed for the makers of studio microphones. Their high quality standards helped us produce a professional and yet affordable studio microphone cable. SC-Source MKII is 100 % shielded by a tight Cu braid and a robust fleece woven around the wire pairs. The fleece is vaporized on both sides with a conductive aluminum coating. This ensures that even with heavy-duty use the 100 % shielding remains unchanged. This cable should be used where electric sources can affect the audio and data transfer. Cables with comparable electrical values cost almost twice as much with other manufacturers! Due to the fine 0.05 mm Cu wires it is a very popular cable for outdoor transmissions and mobile applications.Advantages:Neutral and loss-free audio transmission due to special copper strand design100 % shielding due to dense helical copper mesh screen plus extra AL fleece/AL foilProfessional technology at a budget priceAvailable in a notch- and cold-resistant PUR versionApplication:Professional studio and microphone technologyOutdoor transmission/OB vanPermanent stage application
€3.32*
Microphone cable AES/EBU SC-AQUA MARINEX MIKRO 25; 2 x 0,25 mm²; PUR-SR Ø 7,20 mm; black

200-0241AQ

Shower singers should be happy now ...Over the new SC-AQUA MARINEX MIKRO 25 microphone cable for permanent underwater use. The SC-AQUA MARINEX MIKRO 25 microphone and AES/EBU cable is the standard installation line in wet zones like e.g. aquaparks or water oases. Not only does it ensure an excellent audio transmission, it also allows to trigger visual effects. Especially with longtime events such as lake night festivals, Christmas markets, sports events, in the theater sector or the demanding OB van technology the SC-AQUA MARINEX MIKRO 25 is the ideal connection. To arm it against the high water pressure as well as mechanical and electrical influences, we gave the wires an additional internal stabilization and fitted them with two tight braided screens which are insulated against each other, i.e. for safety reasons one screen may be applied to the shell of the XLR connector. Of course, the cables can also be used for standard sound reinforcement applications. They are somewhat more rigid than conventional PVC cables, yet almost indestructible.Advantages:Sea- and freshwater resistant outer jacket110 Ohm Impedance, AES / EBU, DMX 512Transversely watertight due to water-absorbing, pressure-compensating protective bandingHalogen-freeCold-flexible and reelableUV- and microbe-resistantShielded by two tight CU mesh screens, insulated against each otherApplication:Permanent laying in a maximum water depth of 50 mDemanding outdoor installation (e.g. with long-time events)Installation and usage near the coast and in boat-buildingIn- and outdoor installation in leisure parks and water oasesDigital control of visual effects
€15.30*
HICON Plastic cap, Metal cap for all HICON-XLR connector, plastic

HI-XC-CAP-P

Metal cap for all HICON-XLR connector
€0.88*
SC-Monolith 1; power: 3 x 1.50 mm²; DMX: 1 x 2 x 0.25 mm²; PVC Ø 13,00 mm; black

500-0051-1

When the lights begin to dance...the people stare in wonder! But there is quite a bit of technology behind it. And cables do not play the least important part here. The power for the spotlights and the control signals for their movements must be transmitted via cables. Both cables are combined in a robust cable hose, providing the input lead for the lighting desk and other DMX 512-equipped control devices. The SC-Monolith 1 POWER/DMX consists of a 3 x 1.50 mm² power cable and one DMX 512 line. Each DMX wire pair is shielded by a tinned helical copper mesh. The power cable was developed in compliance with VDE and has its own jacket for extra safety. Of course the AES/EBU cable can also be used as a microphone cable or as a feed line for active loudspeaker systems.Advantages:Parallel control for lighting boards through one cable via power line and DMX signalVery flexible and enormously tread-resistant due to the round jacket made of cotton and viscoseVery good pairwise shielding of the DMX lines due to tinned helical copper mesh screen or copper braidingMiscellaneous:Note: two white filling elements are integrated in the cable (see cable illustration)Application:Control line for DMX lighting consoles (wave impedance of 0 Ω)Analogue + digital audio multipair with power supply
€13.19*
Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black

200-0001

One thick coat...Protects the inner structure against mechanical strain such as pulling, tearing and knotting. This is why we gave STAGE 22 a thick outer jacket of 6,40 mm. But also the electrical values and the technical construction are very presentable: the STAGE 22 has a low capacitance and high bending cycles, provided by the super thin, tightly stranded single wires. The shielding of bare Cu wires has an optical coverage of 99 % (instead of the otherwiseusual 85 %). The STAGE 22 is therefore the ideal cable for stage, homerecordists, renters and ELA technicians. The STAGE 22 is a very inexpensive cable, but you won't have to accept any trade-offs.Advantages:High transmission quality due to the usw of fine strandingVery rugged owing to the thick, soft PVC jacketGood shielding due to dence helical copper mesh screenHigh flexibility makes it easy to reelAffordable priceApplication:Stage applicationHome recording
€2.42*
Loading...
Upload in progress, please be patient ...