BLACKBOXX 19" -> Square-MP-connector
Wired and loaded...
are our 19“ stagebox systems (closed chassis) for installation in studio and stage racks. The 19“ housing is 94 mm deep. The number of height units (RU) is shown in the tables below.
For the XLR equipping we use locking metal panel mount connectors from HICON or NEUTRIK® and 2 ILME multipin connectors with two latching clamps each (ILME is generally compatible with Harting). The returns are only wired to the FOH output. We supply the stagebox with common grounding (for separate grounding see the following pages).
For our 19“ systems with transformer technology we normally use 1:1 transformers with MU metal shielding for optimum interference protection and a max. input of +12 dBu. The multipin 1 (FOH) receives the signals directly from the inputs and is connected to the returns, which allows 48 V phantom power supply from the FOH console, whereas multipin 2 (monitor) receives the transformerless signals (inputs only).
For an advanced signal distribution, e.g. to a remote truck, we can also offer a third multipin connector with 1:1+1 transformers. We gladly accept your written orders for custom designs by fax or e-mail under support@sommercable.com. Wiring diagrams can be found under www.sommercable.com/support
For more complex applications we recommend our modular SYSBOXX system, see the “Modular Systems“ chapter.
Advantages:
- 19“ rack, floor or wall mount
- Professional workmanship and wiring
- Large and clear numbering for inputs and outputs
- Fitted with locking panel-mount metal XLR connectors from HICON or NEUTRIK®
- Subsequent conversion from common to separate grounding possible (max. 32 channels)
- Height: 4 HU
Application:
- Professional studio, stage or rack installation
- Indoor and Outdoor Installation
- Floor and wall mounting
32 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), Type D M3, nickel (NC3FDLX-M3)
8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), Type D M3, nickel (NC3MDLX-M3)
2 x ILME rectangle MP 24, 108-pol , Contact Insert, grey (CDDM108)
2 x ILME rectangle MP 24, metal-, Add-on housing, flat, 2 clamps, grey (CHI24)
2 x ILME rectangle MP 24, Protection cap with fastening rope, 4 bolts, grey (CHC24)
| Article number: | BXRF-Z32/08 |
|---|---|
| EAN: | 4049371021623 |
| In: | 32 |
| Out: | 08 |
| Configuration: | common grounding |
| Article number: | BXRF-Z32/08 |
|---|---|
| EAN: | 4049371021623 |
| In: | 32 |
| Out: | 08 |
| Configuration: | common grounding |
BLACKBOXX 19" -> Square-MP-connector
Advantages:
- 19“ rack, floor or wall mount
- Professional workmanship and wiring
- Large and clear numbering for inputs and outputs
- Fitted with locking panel-mount metal XLR connectors from HICON or NEUTRIK®
- Subsequent conversion from common to separate grounding possible (max. 32 channels)
- Height: 4 HU
Application:
- Professional studio, stage or rack installation
- Indoor and Outdoor Installation
- Floor and wall mounting
Technical Data:
- Article number: BLACKBOXX19-MP
- Application: BLACKBOXX 19" -> Square-MP-connector
- Old article number: BXRX-M