| Twisted Pair Transmission As described at the start, the transmission length for video signals is restricted for physical reasons. Especially when we want to transmit a noise free image, we have to use a different transmission medium to send the signal. That is what the following twisted pair tracks are for. Transmissions of up to 800 m require a simple twisted-pair UTP-cable. CAUTION: Shielded twisted pair cables will reduce the reach! (TP = Shielded twisted pair, UTP = Non-shielded twisted pair) |
|
|
|
|
|
|
||||
| KR-705XL | |
KR-TP122 | KR-TP124 |
| ORDER-NO. | Signal / Function | Input | Output | Cable / length | Remarks | |
| KR-705XL | FBAS / CV-transmitter | BNC | 2 x twisted pair / clamps BNC Loop out |
UTP / 1000 m | ||
| KR-706XL | FBAS / CV-receiver | Twisted pair / clamps | 2x BNC parallel Twisted pair / clamps loop-out |
|||
| KR-TP1XL | FBAS / CV-transmitter | BNC | Twisted pair / clamps | UTP / 1000 m | ||
| KR-TP2XL | FBAS / CV-receiver | Twisted pair / clamps | BNC Twisted pair / clamps loop-out |
|||
| KR-TP41 | YUV + SPDIF-transmitter | 3x Cinch (YUV) + 1x Cinch (SPDIF) |
RJ45 | UTP / 100 m | ||
| KR-TP42 | YUV + SPDIF-receiver | RJ45 | 3x Cinch (YUV) 1x Cinch (SPDIF) |
|||
| KR-TP121 | VGA + audio transmitter | SubD15HD (VGA) 3.5mm jack (audio) |
RJ45 | UTP / 100 m | ||
| KR-TP122 | VGA + audio receiver | RJ45 | SubD15HD (VGA) 3.5mm jack (audio) cinch (SPDIF audio) |
Audio out parallel Analog and digital | ||
| KR-TP123 | VGA / audio / RS232-transmitter |
SubD15HD (VGA) 3.5mm jack (audio) Twisted pair/clamps (RS232) |
RJ45 | UTP / 100 m | ||
| KR-TP124 | VGA / audio / RS232-transmitter |
RJ45 | SubD15HD (VGA) 3.5mm jack (audio) Cinch (SPDIF audio) Twisted pair / clamps (RS232) |
Audio out parallel Analog and digital | ||
| KR-TP300FW | Firewire transmitter / receiver |
6-pin firewire (input and output) RJ45 Loop In |
RJ45 | STP / 100 m | Max. band width 100MBit/s |