| Converters Different transmission formats are not compatible. A converter is required for conversion. Such units are easily realized for analog use. To convert analog TV-signals into image signals for PC-technology, analog-digital converters that recalculate the image line by line on a digital level are needed. This also applies for the conversion to digital TV-formats (SDI). |
|
|
|
||||
|
||||||
| KR-401C | |
KR-401DN | |
KR-VP100 | |
|
|
||||||
|
|
|
|
|||
|
||||||
| KR-VP414 | |
KR-VP416 | |
KR-7408 | KR-7508 |
| ORDER-NO. | Function | Inputs | Outputs | Band width | Level | Connection |
| KR-401C | Format converter | 1 x Y/C | 2 x Y/C + 2 x FBAS | 160 MHz | 1Vpp nominal; 75 Ohm | S-video / BNC(FBAS) |
| KR-401DN | Format converter | 1 x FBAS | 1 x Y/C | 3.6 MHz (Y) | Y= 1Vpp; 75 Ohm C= 1Vpp; 75 Ohm |
BNC (FBAS); S-video |
| KR-VP100 | Standard PC-interface |
1 x VGA | 1 x VGA + 1 x RGBHV |
360 MHz | 0.7Vpp 75 Ohm; H+V = TTL-level |
HD-15; 5 x BNC |
| KR-VP414 | Scaler/format converter to VGA, HD |
1x FBAS; 1x Y/C |
analog: RGBHV digital: YPbPr |
Output RGBHV for VGA, SVGA, XGA + WXGA |
1Vpp 75 Ohm | HD-15 |
| KR-VP416 | Scaler/format converter to VGA, HD, DVI-I |
1x FBAS; 1x Y/C |
analog: RGBHV digital: YPbPr |
Output RGBHV for VGA, SVGA, XGA + WXGA |
1Vpp 75 Ohm | HD-15 DVI-I |
| KR-7408 | Format converter programmable via RS 232 |
1 x SDI | 1 x SDI; 1 x FBAS; 1 x Y/C / YUV |
5.7 MHz (analog) | SDI ref. SMPTE-259M; | BNC; DSUB 9p |
| KR-7508 | Format converter programmable via RS 232 |
1 x FBAS; 1 x Y/C |
2 x SDI | Digital res: 10 Bit | SDI ref. SMPTE-259M; | BNC (FBAS); S-video DSUB 9p |